Multisteer Hydraulic Outboard Steering System up to 115hp

Outboard Hydraulic Steering System includes:

• Hydraulic Balanced Bull Horn Cylinder
• Front Mount Hydraulic Helm Pump
• Hydraulic Hoses, 5mt each
• Hydraulic Steering Fluid 1l
• Oil Filling Kit

*Steering Wheel not included

Hydraulic Balanced Cylinder:

The cylinder is the most important component which provides linear movement to the engine or rudder depending on application and thus steers the boat to starboard or port.

Hydraulic Manual Helm Pump:

The manual helm pump is an axial piston driven pump which draws and forces the steering fluid when the wheel mounted on the helm shaft is rotated. Its volume determines the number of turns required hard over to hard over to guide the engine. The pump is assembled with lock valve to prevent untimely engine movement when the helm is not operated. The lock valve is also fitted with pressure relief valve to protect the system against unusual pressure increase.

Hydraulic Hose Tube:

Hose Tube is designed for transferring steering fluid from helm pump to the cylinder and vice versa. Hoses are designed flexible so as to be routed through complex or small bending radius. It is also tested at higher pressure than maximum working pressure to prevent oil leakage from system.

Hydraulic Steering Fluid:

Hydraulic Steering Fluid is required where the helm pump while being turned, pushes the fluid such that it travels through the tubing and displaces the cylinder. Use of correct steering fluid is highly recommended.