Propspeed Clear Coat - 320ml OM-782D

Propspeed - Clear Coat - 320ml

Propspeed Clear Coat, a non-toxic, a silicone topcoat which forms a super slick outer layer that marine growth cannot adhere to, improving speed and reducing fuel costs.

Propspeed also reduces the risk of corrosion by electrically isolating the metal, as well as limiting the exchanges between the ions and the gases contained in the water and the metal. In short, if a reaction can’t occur, there will be no corrosion!

The Propspeed system is suitable for use on propellers, shafts, rudders, struts, keel coolers, pod drives, thrusters, fire suppression pumps, and any other underwater metal surface.

Clear Coat application should be done with a high quality disposable brush. Ensure all drips and runs in the clear coat are brushed out as well as all edges. Spray application is not recommended as Clear Coat contains silicone.

Clear Coat is the forth step in the Propspeed application process. 
1. Propclean
2. Propprep
3. Etching Primer
4. Clear Coat

Technical Data Sheet